BED OF NAILS DIY PCB

*PLEASE BE AWARE THERE IS NO TECHNICAL SUPPORT PROVIDED WITH THESE, YOU WILL NEED PREVIOUS SOLDERING EXPERIENCE*

All surface mount components pre-soldered.

Can either be wired as the original Bed of Nails Piezo based noise box or just as a standalone Ring modulator.

You will need:

- An enclosure
- Piezo Disc
- 2 x 100uf Electrolytic Capacitor
- 10nF Capacitor
- 2 x 6.25mm Jacks
- DC jack
- 2 x Knobs
- B1M potentiometer
- A100K potentiometer
- Mpsa18 transistor
- 3mm Led
- 3mm Led Bezel
- 1N5817 Diode
- 3PDT toggle (can be a footswitch)
- Misc springs
- 6 x 16MM M4 bolts + nuts
- Soldering iron and lead free solder
- Wire

The original kits build guide will be supplied with the PCB.